Shanghai Herrajes Polymer Composite Insulators

• Technics: Hot Forging
• Standard: IEC
• Usage: Substation Fittings, Line Fittings
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: FXB-11/70CT
• Type: Link Fittings
• Application: Overhead Power Line
• Transport Package: Wood Carton
• Specification: porcelain
• Trademark: Herrajes
• Origin: China
• HS Code: 7326909000
• Production Capacity: 300000/Year
• Package Size: 35.00cm * 8.00cm * 8.00cm
• Package Gross Weight: 1.200kg

Product Description

 1.Product Image:
 


2.Technical Parameters and Drawings

2.1 Tension indulatos

HE CODE	Rated voltage (kV)	Rated failing Load (KN)	Section length (mm) ±15	Dry arcing distance (mm)	Min. Creepage distance (mm)	Fin diameter (mm)	Lightning Impulse Withstand voltage (kV)	Power frequency 1min wet Withstand voltage
FXB-11/70CT	11	70	350	160	500	125/90	75	50
FXB1-15/70CT	15	70	350	185	420	100	95	55
FXB1-24/70CT	24	70	455	275	650	100	155	70
FXB1-24/70ST	24	70	455	275	720	100	155	70
FXB1-33/70CT	33	70	500	320	840	100	75	200
FXB-36/70CT	36	70	640	365	860	100	80	210
FXBW4-36/70SB	36	70	670	455	1350	140/110	95	230
FXBW4-36/70CT	35	70	670	455	1350	140/110	95	230
FXB- 66/70SB	66	70	890	704	2240	140/110	185	410
FXB3-110/100(120)SB	110	100 (120)	1260	1050	3150	142/110	335	750
FXB3-132/100(120)SB	132	100 (120)	1395	1150	3450	142/110	350	820

2.2 Line Post insulators

HE CODE	Rated voltage (kV)	Min. Creepage distance (mm)	Rated failing Load (KN)		Lightning Impulse Withstand voltage (kV)	Power frequency 1min wet Withstand voltage	Section length (mm) ±5	Dry arcing distance (mm)
			Bending	Twist
FZ-11/15	11	560	6	1.2	45	110	470	230
FZ-24/33	24	1250	8	1.5	95	180	585	310
FZ-33/36	33	1250	8	1.5	95	180	740	475
FZ-66/69	66	2160	12.5	2	170	350	865	740

2.3 Post Insulators

 

HE CODE	Rated voltage (kV)	Rated Bending Load (KN)	Section length (mm) ±15	Dry arcing distance (mm)	Min. Creepage distance (mm)	Sheds Distance (mm)	Lightning Impulse Withstand voltage (kV)	Power frequency 1min wet Withstand voltage
FZSW-11-4	11	4	215	130	290	105/78	75	42
FZSW 15-5	15	5	260	185	600	138/112	105	55
FZSW-24-8	24	8	355	255	750	138/112	145	65
FZSW 33-8	33	8	420	340	1200	126/92	150	70
FZSW 36-10	36	10	500	390	1200	138/112	175	75
FZSW 69-12.5	69	12.5	760	640	2010	146/117	410	185
FZSW 32-12.5	132	12.5	1200	1900	3200	190/152	650	230

2.4 Pin insulators

HE CODE	Rated voltage (kV)	Rated Bending Load (KN)	Section length (mm) ±15	Dry arcing distance (mm)	Min. Creepage distance (mm)	Sheds Distance (mm)	Lightning Impulse Withstand voltage (kV)	Power frequency 1min wet Withstand voltage
FPQ-11-5	11	5	270	140	350	138/110	60	45
FPQ-15-5	15	5	330	195	490	138/110	65	140
FPQ-24-8	24	8	390	260	720	140/112	70	155
FPQ-33-8	33	8	445	295	1050	140/112	75	150
FPQ-36-10	36	10	500	330	1200	140/112	95	200

HE CODE	Rated voltage (kV)	Rated Bending Load (KN)	Section length (mm) ±15	Dry arcing distance (mm)	Min. Creepage distance (mm)	Sheds Distance (mm)	Lightning Impulse Withstand voltage (kV)	Power frequency 1min wet Withstand voltage
FPQ-11-5	11	5	270	140	350	138/110	60	45
FPQ-15-5	15	5	330	195	490	138/110	65	140
FPQ-24-8	24	8	390	260	720	140/112	70	155
FPQ-33-8	33	8	445	295	1050	140/112	75	150
FPQ-36-10	36	10	500	330	1200	140/112	95	200

3.Product Description:
The composite insulator product consists of three parts: glass fiber epoxy resin rod, silicone rubber shed, and hardware. Its silicone rubber shed adopts the integral injection molding process, which solves the key problem affecting the reliability of composite insulators, and the electrical breakdown of the interface is solved. The connection between the glass lead rod and the metal fittings adopts the most advanced crimping tool and is equipped with an automatic sonic flaw detection system. It has high strength, beautiful appearance, small size and light weight. The metal fittings are galvanized to prevent rust and can be interchanged with porcelain insulators. Use, this product has a reliable structure, does not damage the mandrel, and can give full play to its mechanical strength.

Composite insulators mainly rely on unidirectional glass fiber reinforced resin pulling rods (commonly known as mandrels) to bear the mechanical load. The most prominent performance characteristics of FRP rods are high tensile strength and specific strength. The glass fibers in the pulling rod are arranged along the axial bearing direction, so that it has a high axial tensile strength, generally up to 1000 MPa or more. Therefore, the tensile failure strength of a pulling rod with a diameter of only 18 mm can reach more than 250 kN. And because the density of the pulling rod is generally only 2.0 g/cm3, its specific strength (ratio of tensile strength to weight) is 5 to 6 times that of high-quality carbon structural steel. The characteristics of high strength and high specific strength of the drawing rod are the basis for the high strength, light weight and small rod diameter of the composite insulator.

Although the composite insulator completely relies on the glass fiber pulling rod to bear the mechanical load, the strength of the mandrel is not equal to the strength of the composite insulator, because the mandrel must transmit the load through the end attachment of the insulator in order to communicate with the tower and the transmission line. wires are connected. The end connection must be the place where the mechanical stress is most concentrated, and different connection structures will also lead to different degrees of stress concentration. Therefore, the mechanical strength of the composite insulator actually depends more not on the mechanical strength of the core rod, but on its The mechanical strength of the end connection, that is, the utilization strength of the mandrel. The composite insulators with the same core rod and different connection structures have different mechanical strengths, so the utilization strength of the core rods is different.

4.Product Details:
Name: composit Insulators, rubber insulators.
HS code: 85469000
Package: carton packing; palletized; as required
Trademark: HE, as required
Origin: China
Raw material: composite material
Finish: Plain
ODM&OEM service: yes
Sample: available, FOC
Payment term: T/T, 30% prepayment and 70% balance against B/L
Certificate: ISO
Delivery time: 20-40 days
MOQ: 500pcs
Export term: FOB; CIF
Production capacity pcs/day: 2000
 






Company Introduction:
ISO9001 Certified Company that Specializes in Galvanized Pole Line Hardware
Shanghai Herrajes Industry Co., Ltd, is an ISO9001 certified company that specialized in the manufacture and export of galvanized pole line hardware for electrical transmission and distribution lines that comply with the norms and standards required. We have the most sophisticated and modern technology in the field of electrical products, also have qualified professionals offering benefits to customers, quality and super competitive prices in the market.
We manufacture electrical pole line hardware galvanized with high quality in order to meet the specific needs of our customers while maintaining a leadership strategy that will guarantee profitability to the company and benefits to customers, partners, employees, community.